Authorized Gemini Inc Reseller
1-800-270-3343
Contact Us
 

Cut Plastic Letters - Mounting Options

Acrylic, Cut Plastic Letters
Installation Methods Available

Plain Mounting

Plain mount cut plastic letters are shipped without mounting hardware.


Stud Mounting

Studs are metal threaded posts on the rear of the cut plastic letters.

Specify stud lengths of 1", 1-1/2", 2", 3", 4", 5" and 6".

Specify if studs need to be in line for brick or block wall mortar joints.
(Brick -- 2-5/8" on center; block -- 8" on center.)


Pad Mounting

Pads are plastic disks on the rear of the cut plastic letters. Secure the cut plastic letters to the wall with silicone adhesive. Adjustable or flush pads available upon request. Pad mount only recommended on letters less than 24" tall.


Stud/Pad Combo Mounting

Combinations have pads at the bottom and pad/stud combinations at the top of the cut plastic letters. Specify if studs need to be in line for brick or block wall mortar joints. (Brick -- 2-5/8" on center; block -- 8" on center.) Not for letters under 6".


Stud/Pad Combo Mounting All

Combination All cut plastic letters have stud through pads on all mounts. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6".


Flush Stud Mounting

A minimum of 3/8" thickness is required for drilling and tapping of flat cut acrylic plastic letters. Add 10% to the price.

Thinner acrylic cut plastic letters will have a pad/block glued to the back.


 

Double Sided Tape

Add 40% to the "No Hardware." Price. Tape is 3M #4930 – 25 mil.


A Business with No Sign is a Sign of No Business