Formed Plastic Letters
Installation Methods Available |
 |
Plain Mounting
Plain Mount formed plastic letters are shipped without mounting hardware. |
|
 |
Flange Mounting
Flange is a flat, 3/16" to 1/2" perimeter on the formed plastic letters return into which holes can be drilled. Secure with screws or nails. Wider flange available upon request. Not recommended for letters under 6".
|
|
 |
Stud Mounting
Studs are metal threaded posts on the rear of the formed plastic letters. Specify stud lengths of 1", 1-1/2", 2", 3", 4", 5" and 6". Specify if studs need to be in line for brick or block wall mortar joints. (Brick -- 2-5/8" on center; block -- 8" on center.)
|
|
 |
Pad Mounting
Pads are plastic disks on the rear of the formed plastic letters. Secure the formed plastic letters to the wall with silicone adhesive. Adjustable or flush pads available upon request. Pad mount only recommended on letters less than 24" tall. |
|
 |
Stud/Pad Combo Mounting
Combinations have pads at the bottom and pad/stud combinations at the top of the formed plastic letters. Specify if studs need to be in line for brick or block wall mortar joints. (Brick -- 2-5/8" on center; block -- 8" on center.) Not for letters under 6". |
|
 |
Stud/Pad Combo Mounting All
Combination All formed plastic letters have stud through pads on all mounts. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6". |
Alternative Formed Plastic Installations |
 |
Outside Bracket
Brackets are L-shaped Plastic projections flared outward from the back of the formed plastic letters.
|
|
 |
Wire Mounting
Wires are stainless steel hooks inserted into plastic blocks glued to inside of formed plastic letters.
Available for flush mounting or with 1/2", 1", 1-1/2" or 2" standoffs on flat faced letters 6" and up. |
|
 |
Free Standing
Free Standing formed plastic letters have 90 degree mounting brackets for installing on roofs. Other angles available upon request. Price is 3 times price listed.
|
|
 |
Foam Filled
Foam Filled formed plastic letters are filled with rigid urethane foam and cut flush to the back edge of the letter.
Available for letters 9" and smaller. Price is 3 times price listed. |
|
